Description
EMLID NTRIP CASTER
Stream RTK corrections from your base to the rovers over the internet
Emlid Caster works with Reach and any other receivers with NTRIP support. The service is available for free and works worldwide.
Your setup
Emlid Caster allows you to set up your own NTRIP base for an RTK drone (DJI, Autel, etc.), tractor, or another GNSS receiver.
Our Caster is a web application. It means you only need a base, rover, and connection to the internet. Just make sure both base and rover works with the same format.
Just sign up and start using
The Emlid Caster is extremely easy to use. Just sign up and your NTRIP credentials will be generated automatically. You can start using the caster immediately. Connectivity is limited
to 5 bases and up to 10 rovers at the same time. If you need more connections, check Caster Pro.
Set corrections on your receivers
Enter NTRIP credentials on
your base station and rover
Workflow for Reach receivers is described on the right. If you have another device, email us at support@emlid.com. Our application engineers will tell you how to work with the credentials.
To work with NTRIP, you need to connect your receivers to the internet
For Reach RX
Turn on mobile data on your smartphone and connect to Reach RX. It will use the internet connection from your mobile device.
Check the tutorial about how to connect to Reach RX.
For Reach RS3 / RS2+
Insert a SIM card and enable Mobile data
on Reach RS3 / RS2+, or turn on mobile data on your smartphone and share it over Wi-Fi hotspot.
Check the tutorial about how to connect Reach RS3 or Reach RS2+ to other networks.
Paiement et sécurité
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.