Description
Discontinued Product Notice: Click below to view recommended alternatives: Link
DJI Agras MG-1 Professional Crop Sprayer
The DJI Agras MG-1 is an octocopter designed for precision variable rate application of liquid pesticides, fertilizers and herbicides, bringing new levels of efficiency and manageability to the agricultural sector.
- Payload Capacity up to 10kg liquid payloads including pesticides, fertilizers, herbicides
- Speed and power 40-60x Faster than manual spraying operations
- Cover 7-10 Acres Per Hour of operation, cover area of 4000-6000m²
- Foldable Design allows for Stow-And-Go and simple transportation
- Reliability and Longevity: Triple Filter System and Centrifugal Cooling System
- Accurate Spraying is achieveing with interchangeable nozzles, atomized spraying, and all-round spraying
- The MG-1 has 4 application nozzles that have been placed below the motors
- Intelligent Flight Modes: Smart Mode/Manual Plus/Manual Mode
- Real-Time Safety Features empty tank warning, operation resumption, system data protection
- Microwave Radar utilized with the MG-1 Intelligent Flight Control system
- Terrain Follow scans the terrain below in real-time, adjusts constantly to maintain height above crops
- Dedicated Remote Controller featuring Lightbridge 2 transmission system ultra low-latency
- Ready To Fly: everything you need to fly included, pre-tested by our experienced technicians
MAXIMUM EFFICIENCY
The powerful propulsion system enables the MG-1 to carry up to 10kg of liquid payloads, including pesticide and fertilizer. The combination of speed and power means that an area of 4,000-6,000 m² can be covered in just 10 minutes, or 40 to 60 times faster than manual spraying operations. The intelligent spraying system automatically adjusts its spray according to the flying speed so that an even spray is always applied. This way, the amount of pesticide or fertilizer is precisely regulated to avoid pollution and economize operations.
RELIABILITY AND LONGEVITY
Equipment used in plant protection operations is susceptible to dust and corrosion, leading to high cost of maintenance and shortened lifespans. To counteract degradation, the MG-1 is designed with a sealed body and an efficient, integrated centrifugal cooling system. As it flies, the surrounding air enters the aircraft body via the front inlet, equipped with a triple filter system that keeps dust and particulate matter from entering. The air then passes through each of the aircraft’s arms to the motors, capturing heat from all components and the entire structure before exiting and dissipating the heat to the surrounding air. The combination of cooling and filtering increases the expected lifespan of each motor by up to three times.
ACCURATE SPRAYING
Spray nozzles can be chosen according to the properties of each liquid to optimize atomization, energy efficiency and the amount of liquid sprayed. The included nozzle is resistant to wear and can be used for thousands of hours of effective spraying without degradation. In total, the MG-1 has four nozzles, each placed directly below a motor. The downward airflow generated by the propellers accelerates the spray, increasing its reach.
EASE OF USE
The advanced flight controller integrated with the aircraft instantly and precisely responds to the pilot’s input. Choose between three flight modes: Smart mode, Manual Plus Mode and Manual mode, according to terrain and the specific needs of each mission.
Under Smart mode, the flight can be easily planned with the press of a few buttons, without the need for mapping knowledge or other software, making the MG-1 not only the most efficient but also the most easy to use spraying solution. In Manual Plus Mode, the aircraft performs the same turns at the press of a button as it does automatically under the Smart mode, allowing for planning to be done on the fly for fields of irregular shape. Under Manual mode, the pilot freely navigates the aircraft.
INTELLIGENT MEMORY
The MG-1 automatically records its current and remembers its past coordinates as it makes its way across the field. In case the operation is interrupted, for example due to depleted battery or spraying liquid, flight easily be resumed from the last point in its memory after changing the battery or refilling its tank.
FOLDABLE DESIGN
The MG-1 design is based on a Y-type folding structure that can be installed without the use of any additional tools. Motor arms fold inwards making the aircraft compact and easy to transport, for example in the trunk of a car. Made from high-strength carbon fiber materials, the body frame is light yet durable and able to withstand the harshest conditions.
TERRAIN FOLLOW
By integrating a microwave radar together with the MG-1's intelligent flight control system, the aircraft is able to scan the below terrain in real-time, and adjust to keep a constant, centimeter accurate, height above crops. Spray density is maintained even as the terrain rises and drops, so that the optimal amount of liquid is applied at all times.
DEDICATED REMOTE CONTROLLER
The dedicated remote controller is equipped with the latest Lightbridge 2 transmission system which enables ultra low-latency controls. Like the aircraft body, the remote is designed with water and dust protection. A special low-energy display panel gives real-time flight information and is able to last over extended periods of time on a single charge. Together with the highly responsive joysticks and convenient function keys, mastering the art of agricultural spraying is made easier than ever before.
SPECIFICATIONS
AIRCRAFT FRAME
Diagonal Wheelbase | 1520 mm |
---|---|
Frame Arm Length | 625 mm |
Dimensions |
|
PROPULSION SYSTEM
MOTOR
Stator Size | 60mm x 10 mm |
---|---|
KV | 130 rpm/V |
Max Thrust | 5.1 kg/rotor |
Max Power | 770 W |
Weight (with cooling fan) | 280 g |
FOLDABLE PROPELLER
Material | High-performance engineered plastics |
---|---|
Diameter / Pitch | 21x7.0 inch (533x178 mm) |
Weight | 58 g |
ESC
Max Allowable Current (Continuous) | 25 A |
---|---|
Operating Voltage | 12S LiPo |
Signal Frequency | 30 to 450 Hz |
Drive PWM Frequency | 12 kHz |
SPRAY SYSTEM
LIQUID TANK
Volume | 10 L |
---|---|
Standard Operating Payload | 10 kg |
Max Battery Size | 151mm x 195mm x 70mm |
NOZZLE
Model | XR11001 |
---|---|
Quantity | 4 |
Max Spray Speed | 0.43 L/min (per nozzle, for water) |
Spray Width | 4 - 6 m (4 nozzles, 1.5 – 3 m above the crops) |
Droplet Size* | XR11001: 130~250 μm
*Droplet size may vary according to operation environment and spraying speed. |
FLIGHT PARAMETERS
FEATURES
Total Weight (without batteries) | 8.8 kg |
---|---|
Standard Takeoff Weight | 22.5 kg |
Max Takeoff Weight | 24.5 kg (@ sea level) |
Max Thrust-Weight Ratio | 1.81 (with 22.5 kg takeoff weight) |
Power Battery | DJI Designated Battery (MG-12000) |
Max Power Consumption | 6400 W |
Hovering Power Consumption | 3250 W (with 22.5 kg takeoff weight) |
Hovering Time |
|
Max Operating Speed | 8 m/s |
Max Flying Speed | 22 m/s |
Recommended Operating Temperature | 0 to 40℃ |
REMOTE CONTROLLER
FEATURES
Model | GL690B(Japan Only), GL658C |
---|---|
Operating Frequency | 2.400 - 2.483 GHz |
Max Transmission Range (unobstructed, free of interference) | 1km |
EIRP | 100 mW @ 2.4 GHz |
Built-in Battery | 6000 mAh, 2S LiPo |
Charging | DJI charger |
Output Power | 9 W |
Operating Temperature Range | -10 to 40℃ |
Storage Temperature Range |
|
Charge Temperature Range | 0 to 40℃ |
REMOTE CONTROLLER CHARGER
FEATURES
Model | A14-057N1A |
---|---|
Voltage | 17.4 V |
Rated Power | 57 W |
Base Package Includes:
- Agras MG-1
- Controller
Please note that the battery and charger must be purchased separately.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
OUR PARTNER BRANDS

We are honored to have been awarded Sourcewell and Canoe contracts, enhancing procurement efficiency for government, education, and non-profit agencies across North America - View Details
You may also like
Recently viewed
FAQs
Yes, we provide FREE shipping across Canada for orders over $199. Orders under $199 have a flat rate of $25.
Repair service is eligible for free shipping if order value is over $300.
Delivery times depend on your location and the selected shipping method. Estimated delivery times and shipping options are provided at checkout.
If there are any manufacturing defects with your purchase, you may return the product within a specified period, provided it is unused and in its original packaging. We do not provide any returns on repairs parts.
As an authorized distributor, our products typically come with a manufacturer's warranty that covers manufacturing defects for a specified period. The exact duration and terms may vary by product. Please refer to the product details for more information.
Our customer support team is available to assist you with any technical issues or service needs. You can simply reach out to us, and we'll guide you through troubleshooting steps or arrange for service if necessary.
Yes, we recommend reviewing the safety instructions provided with your product. Additionally, ensure compliance with local regulations and best practices to ensure safe and proper use.
Yes, we offer pre-orders for select upcoming products. Pre-order availability, estimated release dates, and any exclusive offers are listed on the respective product pages.
We offer special pricing and support for business customers or bulk orders. Please contact our sales team for customized quotes and additional information.
If you still have any questions, you can contact us below and we will get back to you as soon as possible.