Description
DJI Zenmuse L2
DJI Care Enterprise
In order to provide our users with a more comprehensive service solution, DJI has added support products for DJI Care Enterprise services, as follows:
|
DJI Care Enterprise（Zenmuse L2） |
|||
|
Product Name |
Basic |
Basic (2-Year Plan) |
Plus |
|
Service Period |
Validity Period: 1 year Renew Basic Plan up to twice |
Validity Period: 2 years Renew Basic Plan once |
Validity Period: 1 year Renew Plus Plan up to twice |
|
Covered Area |
the U.S., Canada, the UK, EU countries, Switzerland, Norway, Liechtenstein, Iceland, Serbia, Monaco, Australia, Japan, South Korea, and Mainland China. |
||
|
Service Content |
Water Damage Coverage; Free Two-Way Shipping |
||
|
• 2 low-Cost Replacements • DJI Care Express |
• 4 low-Cost Replacements • DJI Care Express |
• Unlimited free repair services within the coverage amount |
|
|
Purchasing and Binding
|
First activation and binding: DJI Care Enterprise (Basic/Basic 2-Year Plan/Plus) can be purchased if the product meets one of the following criteria: • Brand new and un-activate • Activated less than 72 hours (96 hours for Japan) • Less than 72 hours have passed after the DJI Enterprise device was repaired by an official DJI Service Center
Renew DJI Care Enterprise Basic/Plus can be purchased when the product meets all of the following criteria: • DJI Care Enterprise Basic or DJI Care Enterprise Basic (2-Year Plan) or DJI Care Enterprise Plus is purchased and the total purchased and bound service duration does not exceed 2 years • DJI Care Enterprise purchased has not yet expired or expired within 15 days |
||
Specifications
General
Product Name
-
Zenmuse L2
Dimensions
-
155×128×176 mm (L×W×H)
Weight
-
905±5 g
Power
- 28 W (typical)
- 58 W (max.)
IP Rating
-
IP54
Supported Aircraft
- Matrice 300 RTK (requires DJI RC Plus)
- Matrice 350 RTK
Storage Temperature
-
-20° to 60° C (-4° to 140° F)
General Operating Temperature
-
-20° to 50° C (-4° to 122° F)
System Performance
Detection Range
-
450m @50% reflectivity, 0 klx
-
250m @10% reflectivity, 100 klx
Typical data. Measured using a flat subject with a size larger than the laser beam diameter, perpendicular angle of incidence, and an atmospheric visibility of 23 km. In low-light environments, the laser beams can achieve the optimal detection range. If a laser beam hits more than one subject, the total laser transmitter power is split, and the achievable range is reduced. The maximum detection range is 500 m.
Point Cloud Rate
-
Single return: max. 240,000 pts/s
-
Multiple returns: max. 1,200,000 pts/s
System Accuracy
-
Horizontal: 5 cm @ 150 m
-
Vertical: 4 cm @ 150 m
Measured under the following conditions in a DJI laboratory environment: Zenmuse L2 mounted on a Matrice 350 RTK and powered up. Using DJI Pilot 2’s Area Route to plan the flight route (with Calibrate IMU enabled). Using repetitive scanning with the RTK in the FIX status. The relative altitude was set to 150 m, flight speed to 15 m/s, gimbal pitch to -90°, and each straight segment of the flight route was less than 1500 m. The field contained objects with obvious angular features, and used exposed hard ground check points that conformed to the diffuse reflection model. DJI Terra was used for post-processing with Optimize Point Cloud Accuracy enabled. Under the same conditions with Optimize Point Cloud Accuracy not enabled, the vertical accuracy is 4 cm and the horizontal accuracy is 8 cm.
Real-Time Point Cloud Coloring Coding
-
Reflectivity, Height, Distance, RGB
LiDAR
Ranging Accuracy (RMS 1σ)
-
2 cm @ 150 m
Measured in an environment of 25° C (77° F) with a subject of 80% reflectivity at a distance of 150 m. The actual environment may differ from the testing environment. The figure listed is for reference only.
Maximum Returns Supported
-
5
Scanning Modes
-
Non-repetitive scanning pattern, Repetitive scanning pattern
FOV
-
Repetitive scanning pattern: Horizontal 70°, Vertical 3° \
-
Non-repetitive scanning pattern: Horizontal 70°, Vertical 75°
Minimum Detection Range
-
3 m
Laser Beam Divergence
-
Horizontal 0.2 mrad, Vertical 0.6 mrad
Measured at full width at half maximum (FWHM) conditions. 0.6 mrad signifies that for every 100m increase in distance, the diameter of the laser beam expands by 6 cm.
Laser Wavelength
-
905 nm
Laser Spot Size
-
Horizontal 4 cm, vertical 12 cm @ 100 m (FWHM)
Laser Pulse Emission Frequency
-
240 kHz
Laser Safety
-
Class 1 (IEC 60825-1:2014)
Accessible Emission Limit (AEL)
-
233.59 nJ
Reference Aperture
-
Effective Aperture: 23.85 mm (equivalent to circular)
Max Laser Pulse Emission Power Within 5 Nanoseconds
-
46.718 W
Inertial Navigation System
IMU Update Frequency
-
200 Hz
Accelerometer Range
-
±6 g
Angular Velocity Meter Range
-
±300 dps
Yaw Accuracy (RMS 1σ)
-
Real-time: 0.2°, Post-processing: 0.05°
Measured under the following conditions in a DJI laboratory environment: Zenmuse L2 mounted on a Matrice 350 RTK and powered up. Using DJI Pilot 2’s Area Route to plan the flight route (with Calibrate IMU enabled). RTK in the FIX status. The relative altitude was set to 150 m, flight speed to 15 m/s, gimbal pitch to -90°, and each straight segment of the flight route was less than 1500 m.
Pitch/Roll Accuracy (RMS 1σ)
-
Real-time: 0.05°, Post-processing: 0.025°
Measured under the following conditions in a DJI laboratory environment: Zenmuse L2 mounted on a Matrice 350 RTK and powered up. Using DJI Pilot 2’s Area Route to plan the flight route (with Calibrate IMU enabled). RTK in the FIX status. The relative altitude was set to 150 m, flight speed to 15 m/s, gimbal pitch to -90°, and each straight segment of the flight route was less than 1500 m.
Horizontal Positioning Accuracy
-
RTK FIX: 1 cm + 1 ppm
Vertical Positioning Accuracy
-
RTK FIX: 1.5 cm + 1 ppm
RGB Mapping Camera
Sensor
-
4/3 CMOS, Effective Pixels: 20 MP
Lens
-
FOV: 84°
-
Format Equivalent: 24 mm
-
Aperture: f/2.8-f/11
-
Focus Points: 1 m to ∞ (with autofocus)
Shutter Speed
-
Mechanical Shutter: 2-1/2000 s
-
Electronic Shutter: 2-1/8000 s
Shutter Count
-
200000
Photo Size
-
5280×3956 (4:3)
Still Photography Modes
-
Single shot: 20 MP
-
Timed: 20 MP
-
JPEG Timed Interval: 0.7/1/2/3/5/7/10/15/20/30/60 s
-
RAW/JPEG + RAW Timed Interval: 2/3/5/7/10/15/20/30/60 s
Video Codec and Resolution
-
H.264, H.265
4K: 3840×2160 @30fps
FHD: 1920×1080 @30fps
ISO
-
Video: 100-6400
-
Photo: 100-6400
Video Bitrate
-
4K: 85Mbps
-
FHD: 30 Mbps
Supported File System
-
exFAT
Photo Format
-
JPEG/DNG (RAW)
Video Format
-
MP4 (MPEG-4 AVC/H.264 or HEVC/H.265)
Gimbal
Stabilization System
-
3-axis (tilt, roll, pan)
Angular Vibration Range
-
0.01°
Mounting
-
Detachable DJI SKYPORT
Mechanical Range
-
Tilt: -143° to +43°
-
Pan: ±105°
* Structural limit, not controllable range.
Controllable Range
-
Tilt: -120° to +30°
-
Pan: ±90°
Operation Mode
-
Follow/Free/Re-center
Data Storage
Raw Data Storage
-
Photo/IMU/Point cloud/GNSS/Calibration files
Point Cloud Data Storage
-
Real-time modeling data storage
Supported microSD Cards
-
microSD: Sequential writing speed 50 MB/s or above and UHS-I Speed Grade 3 rating or above; Max capacity: 256 GB. Use the recommended microSD cards.
Recommended microSD Cards
-
Lexar 1066x 64GB U3 A2 V30 microSDXC
-
Lexar 1066x 128GB U3 A2 V30 microSDXC
-
Kingston Canvas Go! Plus 128GB U3 A2 V30 microSDXC
-
Lexar 1066x 256GB U3 A2 V30 microSDXC
Post-Processing
Supported Software
-
DJI Terra
Data Format
-
DJI Terra supports exporting point cloud models in the following formats:
PNTS/LAS/PLY/PCD/S3MB
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.