1 Blue Herelink or Black Herelink Ground Controller
1 Rugged Transport Case
Sony A7R Payload Option Includes:
Sony A7R 61MP camera
35MM Lens
Gremsy gimbal
WWE Payload Option Includes:
Workswell Enterprise Thermal 16MPX Camera
Pixy WE gimbal
Quick Disconnect
1 Damping Plate
Unrivaled Endurance.Limitless Possibilities.
43min Max Flight Time
19.1lbs Max Payload
56mph Max Speed
23knots Max Wind Resistance
Key features
Dual Propeller System
With larger, overlapping propellers, the aircraft retains a more compact frame. The alternating clockwise and counterclockwise propeller configuration increases the aircraft’s efficiency.
Dual Latching GPS Structure
Two GPS units ensure accuracy while also functioning as a convenient carrying handle when batteries are not installed.
SAFE drone™
In the event of a motor failure, the IF1200A will seamlessly transition to a secure manual flying mode & swiftly alert the operator to initiate an immediate landing.
Integrated Remote ID
Integrated Remote ID for out of the box FAA-Compliance.
HD FPV camera
Elevate your visual experience with the IF1200A HD FPV camera. Navigate aerial mapping, photogrammetry missions, utility inspections, and more with unparalleled clarity and precision.
Universal Payload Interface
Facilitates communication between the payload, ground control, and the flight controller, streamlining your workflow and optimizing productivity across virtually any mission.
The IF1200A offers a variety of pre-integrated payloads chosen specifically for each industry.
Optical
EO/IR
LiDAR
Empowering Mission Success Through Adaptive Design
Engineered with the end-user in mind, the IF1200A features an open interface and long flight times, enabling you to conquer missions across diverse domains.
Military
Mapping
Inspection
Emergency Response
Category-leading flight times and an optimal user experience make the IF1200A the heavy-lift platform of choice for the most risk-averse operators in North America.
Not just an aircraft, the IF1200A has numerous fully integrated payloads. Tightly integrated sensors allow operators to efficiently and safely get their job done, driving large increases in operational efficiency and cost savings over the impressive 5+ year projected lifetime of the system.
The SAFE droneTMcapability allows the IF1200A to maintain safe and controlled flights, even in the extremely unlikely event of a motor failure. The IF1200A is able to alert the operator to land immediately and remain in a safe manual flying configuration, providing the ultimate piece of mind to operators with valuable payloads and/or underlying assets.
100% manufactured and supported in San Luis Obispo, CA, USA the IF1200A will be the ultimate tool for your enterprise in support of a variety of industrial applications.
Specifications
Performance
Max Ascent Speed
5 m/s
16.4 ft/s
Max Descent Speed
2.5 m/s
8.2 ft/s
Max Air Speed
25 m/s
56 mph
Max Wind Resistance
12 m/s, 15 m/s gusts
23 knots, 29 knot gusts
Max Tilt Angle
30°
Max Angular Velocity
Tilt: 300°/s, Yaw: 45°/s
Operating Temperature
-10°C ~ 40°C
14°F ~ 104°F
Operating Humidity
10% ~ 95%
Service Ceiling (with given payload)
3.9 km (12,800 ft) w/ 4kg, 2.2 km (7,200 ft) w/ 8.7 kg
Physical Features
Diagonal Size (propeller center to center)
1,025 mm
40.4 inches
Unfolded Size (flight ready, WxLxH)
165.5 x 154 x 76.5 cm
65.1 x 60.6 x 30.2 inches
Folded Size (stow, WxLxH)
47.5 x 49.5 x 47 cm
18.7 x 19.5 x 18.5 inches
Empty Weight (w/o batteries)
7.8 kg
17.2 lbs
Weight w/ Batteries
16.3 kg
35.9 lbs
Max Gross Takeoff Weight
25 kg
55 lbs
Max Payload Capacity
8.7 kg
19.1 lbs
Transport Case Size (WxLxH)
64.8 x 64.8 x 58.4 cm
25.5 x 25.5 x 23.0 inches
Transport Case Weight (w/ aircraft)
29 kg
64 lbs
Flight Stack
Flight Controller
CubePilot Cube Blue H7 Triple Redundant IMUs
GNSS / Compass
CubePilot Here3 M8P (2x)
Payload Power Rails
5v, 12v/15v, 18v, 44.4v (12s battery voltage)
Payload Interface
IFT Universal Payload Interface V2.1
Operating Software
Copter by Ardupilot
Flight Modes
Position Hold
Holds altitude and position, manual roll and pitch
Loiter
Holds altitude and position, precision manual movements using GPS
Auto
Executes pre-defined mission
RTL
Auto returns to takeoff location and lands
Land
Auto land while maintaining position
Altitude Hold
Holds altitude only, failsafe mode if GPS signal lost
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
LifThor RC Pro for DJI RC Pro Controller erich s kirchhoefer (United States)
Lifthor tablet mount system for DJI RC Pro Controller
Excellently made product of cast aluminum and very strong... My only complaint is there was not much mention of the fact that you also need the XL tripod tablet holder to finish the job... but the showcased image of the LifThor mount "shows" the whole settup for $102 as if it all comes together and all you then need to to is hook up the necessary calbes (including the soecific USBc to HDMI adaptor cable and red HDMI to mini HDMI) and your done! Not true! You need to purchase that holder piece for about $19 plus shipping... THEN your set! But to me it's bad representation sho8bg a picture of a "mounted" tablet conjlnectec to the $102 part that nicely attaches to the RC Pro controller.... therefore... you either need to show a different picture... OR clealy state that the tablet holder piece is NOT included for the $102 and is separately sold and how to include and purchase it to create a complete set! Fair enough?
